470uF 250V Nichicon 105c B+ Filter Capacitor (22mm x 50mm)

(12 customer reviews)

$6.95

470uF 250V Nichicon 105c B+ Filter Capacitor 10mm lead spacing with case size of 22mm x 50mm snap cap.

525 in stock

Description

470uF 250V Nichicon 105c B+ Filter Capacitor 10mm lead spacing with case size of 22mm diameter x 50mm length 3000 hour snap cap.  Used on various Amplifone, Eygo, Pentranic, Promax, Toei, Toshiba, Wells Gardner monitor chassis and many other brands and models.  This is special sized to fit the Japanese Candy Cab monitor chassis and also Hantarex Polo chassis with two filter caps.  This Filter Capacitor is used to replace any of the 470uf with lower voltages such as 160v, 180v, 200v.  WE RECOMMEND NOT USING THIS CAPACITOR ON SANYO MONITOR CHASSIS BECAUSE ITS SLIGHTLY TOO TALL AND YOU SHOULD USE OUR OTHER 470uf 250v CAP ON OUR SITE THAT IS SHORTER FOR A BETTER FIT.

Additional information

Weight .0625 lbs
Dimensions 2.5 × 1 × 1 in

12 reviews for 470uF 250V Nichicon 105c B+ Filter Capacitor (22mm x 50mm)

  1. Gto820 (verified owner)

    Replacement flitercaps for Hantarex MTC 9000

  2. Jared Bresee

    Perfect fit with a little better Voltage

  3. rkmartinez (verified owner)

    Replacement filter cap for a Hantarex MTC9110, easy install.

  4. Ben Bassinger (verified owner)

    Worked great and fits perfect to complete my cap kit to get back up with stable pictures.

  5. Marissa Montanye (verified owner)

    Worked perfectly! I love the Kits from this store.
    So convenient and takes the stress out of having to source them yourself.

  6. Mike (verified owner)

    If you’re going to replace caps, use the best, high quality, high temp caps!

  7. rparavich (verified owner)

    These guys are my go to for all my caps, never had an issue, always high quality, thanks for never letting me down!!

  8. Travis Shipley (verified owner)

    This was a perfect fit

  9. cbgames (verified owner)

    Perfect fit for my chassis! Very easy to install!

  10. Joe Williams (verified owner)

    Perfect replacements and easy to install. You can’t go wrong getting replacement caps here! Peter provides top-notch customer service!

  11. Jared Bresee (verified owner)

    Got it this time for my Sanyo monitor 18z2ab. If you made it to this page trust me you want to get a filter cap for your monitor. Super high quality can take a beating at 105c over the 85c and will last for years!
    Thanks Peter!:)

  12. Jared Bresee (verified owner)

    I am back again. I just got a Hantreax 9000 that also uses this value. I have bought the capacitor before and can say with 100% this is high quality, fits nicely, and runs cool. I cannot ask more of a filter cap. Peter is awesome and has the best customer service around so it’s a no-brainer. Btw I have alsoused this value cap on a few radios as a regular cap not just for B+

Add a review

Your email address will not be published. Required fields are marked *