Description
470uF 250V Nichicon 105c B+ Filter Capacitor 10mm lead spacing snap cap with case size of 25mm diameter by 40mm Length. Used on various Amplifone, Eygo, Pentranic, Promax, Sanyo, Toei, Toshiba, Wells Gardner monitor chassis and many other brands and models.
Samantha (verified owner) –
I picked up 2 for my EZ and 2ZAW. Along with the cap kit, this little beauty saved my monitor and I am able to get a nice and steady 108 volts for both of my monitors.
Zach (verified owner) –
Got the 20EZ cap kit from here and added this B+ cap and a B+ pot to put in at the same time. Better to only have the board out once!
Samantha (verified owner) –
Second time bring back a failing EZV, and this cap fit and worked great. Had to bend the pins a little closer together to make it fit easier but soldered in nice and fired up a pretty picture.
Spunky_Bruiser (verified owner) –
I almost did not buy one last order, but luckily I did. While the original did not look bad on the outside, after I took it off I noticed that the bottom was starting to bulge out and needed replacing on my Sanyo. With everything you have to unscrew to get a sanyo chassis out, I rather only have to mess it it one time and be done with it. Who knows how long that old cap would have lasted before I scratched my head figuring out what went wrong after I replaces caps.
Doug Fennell (verified owner) –
You took the time to rebuild the rest of the monitor, and I can guarantee you your original B+ isn’t in any better shape than the other caps you replaced. Do it once, do it right.
Jared Bresee (verified owner) –
As mentioned in the other comments, you might as well just spend the extra few dollars and get yourself a B+ filter because you know you’re going to replacing it soon anyways if it hasn’t gone out already. Plus this is top-notch Parts here folks.
Jared Bresee (verified owner) –
Back again for another one of these caps perfect for the Sanyo Donkey Kong monitors because it’s shorter than the other version and it fits in just tight and perfect. I believe that’s also fits a few other random monitors so double-check what you got because this thing is awesome once again Peter has the highest quality parts and service
James Mendyk (verified owner) –
Nice cap. Not much else to say.
cireone (verified owner) –
Everything worked great as part of my Sanyo EZV monitor (Donkey Kong) servicing. Running like a champ! Excellent customer service to make the experience even Better!
Larry Lease (verified owner) –
If you are recapping your 20-EZ buy this!
If don’t fix now, you will have to later.
John V (verified owner) –
the pins came with little bends that I had to straighten with pliers to get it to fit by 20EZ board. I installed this along with a full cap kit, so this monitor is solid for another 20 years.
cklinejr (verified owner) –
Its nice to have a source for these filter caps.
[email protected] (verified owner) –
I had an EZV20 with a wild, bouncy, and compressed wave across the screen. Installing this filter cap, along with a cap kit, and the wave is gone! Beautiful picture now.
David Jones (verified owner) –
Got this cap for a Kagi 13″ rebuild. Perfect fit! Always nice to replace old caps with the highest quality parts so you will not have to worry with in in the future.
Kevin Albright (verified owner) –
Drop in replacement that worked great.
Thank You.