CraftyMech Arcade Monitor Test Pattern Generator Sanyo / Sharp Adapter Video Cable. The Adapter cable is approximately 1ft long (31cm) overall. This cable is professionally built with the BEST quality parts using Molex / AMP connector housings that will be long lasting dependable cables. Wire is stripped using a thermal wire stripper to eliminate any nicks or wire breakage. We don’t use zip ties to tie the wires together which can get caught on things as you use it, and can have sharp edges plus pinches the wires so we use 3M shrink wrap tubing about every foot which keeps wires tight and the cable stays smooth. We also use a positive latching system to connect the Adapter cable to the Main cables so they won’t come apart accidentally. These cables have .098 6-pin connector for RGBG and Sync and they have the Exact mating connector that matches identically to the original used on the Sharp XM-1801 / XM-2001 and Sanyo / Nintendo chassis. All our Adapter cables have UL1007 / UL1569 22AWG wire and its completely color coded to visually match what its connecting to which helps aide in it’s use. NOTE: You must have our main cable to work with any of our adapter cables.