CR23 CRT Socket (MP1039)

(3 customer reviews)

$5.95

CR23 CRT Neck Socket (MP1039).

660 in stock

Categories: ,

Description

CR23 CRT Neck Board 10-pin Socket (MP1039).  Used on many Arcade CRT monitor chassis.  NOTE:  On some applications you may have to drill out the center hold of the socket to allow the CRT neck pcb guide to go through otherwise the neck pcb won’t push on the CRT quite far enough.

Additional information

Weight .125 lbs
Dimensions 2.75 × 1.75 × 1.25 in

3 reviews for CR23 CRT Socket (MP1039)

  1. Tranquility Base Arcade

    Worked perfect but please be aware for some CRT’s you will have to drill out the center hole to complete the installation.

  2. Stardust Arcade

    Perfect replacement for a CR23 on a G07 to fix a focus issue I was having. Monitor would take 30 minutes to “warm up” and catch focus. Old socket had corrosion on the focus pin, and this replacement fixed the problem, and works perfectly. Like TBA said, before you install this, don’t forget to drill out the center hole or you will have a fitment issue when putting the neck board back on.

  3. A ROSS (verified owner)

    THE CRT SOCKET WORKED – I NEEDED TO MAKE ADAPTERS TO MY OLDER BK CRT TESTER & REJUVINATOR.

    I WAS ABLE TO USE THIS PART TO MAKE AN ADAPTER SOCKET FOR TESTING ARCADE CRT’S.

    BASED OFF OF THIS ALSO, THE SOCKET WILL WORK AS INTENDED IN OEM /REPLACEMENT APPLICATIONS AS IT SEEMED BETTER CONSTRUCTED THAN FACTORY NECK BOARD SOCKETS I HAVE SEEN – GREAT QUALITY PRODUCT, FOR A LOW PRICE. SAVED TONS OF CASH AS OPPOSED TO BUYING ACTUAL ADAPTERS FOR THE BK PRECISION UNIT. I AM NOW ABLE TO USE THE UNIT, THAT DID NOT HAVE THE ADAPTERS FOR OTHER APPLICATIONS.

Add a review

Your email address will not be published.