Description
C30380A Electrohome G07-CBO, GO7-CAO, G07-FBO, G07-CDO and most all G07 variations of monitor chassis this Width Coil New will work on. 75µH –> 225µH range L503.
C30380A Electrohome G07 Width Coil
$15.13
C30380A Electrohome GO7 Width Coil New. 75µH –> 225µH range.
547 in stock
Additional information
| Weight | .0625 lbs |
|---|---|
| Dimensions | 2.5 × 1 × 1 in |
jturon (verified owner) –
Just installed this over the weekend. Great fit in G07 chassis, great quality.
Scott Goldsmith (verified owner) –
Great width coil, just like the original. Works perfect!
Matt Majewski –
Replaced my broken width coil on my G07 with this one and it works and fits perfectly.
Donald Thibert (verified owner) –
These always break on G07 Chassis so this is a direct replacement that works great!
Edwoodjnr (verified owner) –
I have bought a few of these for G07 chassis, all working great
Walt (verified owner) –
Have purchased several of these and they all fit, and function, perfectly .
ivanx (verified owner) –
Agreed—it always seems like the original width coils are broken when I need to complete repairs on a GO7 monitor.
I’m so thankful to have reproductions available. I’ve purchased several of these and they work great. Purchase with confidence!
Neal Sauers (verified owner) –
Perfect fit and replacement for my broken/potted G07 width coil. Works great.
delusional29 (verified owner) –
Bought a couple of these and they both worked great in my G07, which almost always needs replacement.
paul Juray (verified owner) –
great replacement, fits in snugly and work as it should.
Co (verified owner) –
Excellent part here , just what I needed
Andrew Scott (verified owner) –
Always keep one of these on hand, as I rarely see one still fully intact on a G07 rebuild. Quality part and excellent service as always.
Aaron Gum (verified owner) –
Whoa, it looks and fits exactly like the original.. no more brittle, cracked coils or weird fitting repros in my G07s!
delusional29 (verified owner) –
Bought as a spare since I’ve used a couple for G07 replacements. These are a perfect fit and work great.
Looking towards the future: The G07 is an aging monitor and hard to find replacement tubes for. So it would be great if width coils like this one were available for the newer K7000 series chassis which are easier tube swap candidates to keep this hobby alive.
Djones26 (verified owner) –
Great replacement part easy fit
Scott C (verified owner) –
Someone recently told me the G07 width coils are hard to find. I informed them of arcadepartsandrepair, then told me about how solid these are. In fact, I just ordered another today. 🙂
Jeff Roenning (verified owner) –
These are always busted on used chassis – this is an excellent replacement.
Daniel (verified owner) –
I always replace these when I rebuild a chassis. Great quality!! Super fast shipping
Jared Bresee (verified owner) –
Back again this is the only place I know where you can get these. Quite honestly it’s the only place I would go because the quality of products from Arcade parts is super high. I bought this one even though the with coil on one of my chassis was working the plastic is disintegrating so it’s time just to replace it. Even if you’re not quite having problems with the width per se I’ve noticed that replacing the coil helps you to really dial in the monitor. This thing is worth every penny!
Jared Bresee (verified owner) –
Picked up another. I usually don’t replace these unless I see physical damage with the coil the plastic housing will usually disintegrate on the old ones these are perfect replacement and so far have worked spot on every time. I’m thinking about getting another one just to have on hand because although these g07s are good they’re over 40 years old now and things like this do begin to fail. Plus arcade parts and repair has absolutely the best service and highest quality products on the planet
Mike (verified owner) –
Great replacement for a broken coil or a coil with a seized ferrite slug.
Michael Behr (verified owner) –
Always great parts. Coils are never frozen up like from other vendors.
Dennis (verified owner) –
Perfect replacement for my G07. Shipped fast and well packaged, I’ve purchased many parts from this seller and will buy many more, Awesome service.
Dylan (verified owner) –
5 stars-great product
Tron guy (verified owner) –
Good coil
Jeff Friedrichs (verified owner) –
Always the right parts at the right price, shipped quickly
Dylan (verified owner) –
5 stars-great width coils
Mike (verified owner) –
I always keep a couple on hand. This is the only place to get them or any other monitor repair parts!
B.Harms (verified owner) –
fixing a Arkanoid G07. Works great!
Patrick (verified owner) –
I had to spread the legs out just slightly and it fit right in. Very sturdy should last another 40 years
Relectromatics (verified owner) –
Happy to find unique parts for old chassis. My only suggestion is that before installing, remove the ferrite core out the bottom and reinstall through the top SLOWLY to work out the stiffness. I have had these freeze up and not travel more than 3/4 the way up. Very frustrating after soldering this to the board. Also, you can wrap one turn of scotch tape around your PLASTIC and only PLASTIC adjustment tool to get a better purchase on the core. That’s my only complaint.
tron guy (verified owner) –
These coils are very good. They are a little tight at first, but if you turn the slug back and forth a bunch it loosens up and works perfectly!
Brendan Maguire (verified owner) –
Perfect replacement for your most likely broken G07 width coil
Gto820 (verified owner) –
Original usually breaks when you adjust it. This the perfect replacement.
Shawn Markley (verified owner) –
These have worked well to replace wore out and broken width coils on the G07!
tron guy (verified owner) –
5 stars as always.