Midway A082-90400 Power Supply 105C Cap Kit

(13 customer reviews)

$19.00

This Power Supply Cap Kit will work on all Midway 90400 versions of Arcade Power supplies used on many older black and white games such as sea wolf, space invaders and many other game with this power supply.  This “Mega Deluxe Cap Kit” has a total of 6 Capacitors which includes the 4 Axial capacitors and zip ties to tie them down to the PCB.  All capacitors are 105c in this kit.

69 in stock (can be backordered)

Description

Midway A082-90400 Power Supply 105C Cap Kit.  This Power Supply Cap Kit will work on all Midway 90400 versions and also the 80-904B & 80-901D versions of Arcade Power supplies used on many older black and white games such as sea wolf, space invaders and many other game with this power supply.  With some of these other variations of power supplies that this kit will work for some of the positions may vary so make sure to place like parts where you removed the same parts.  This “Mega Deluxe Cap Kit” has a total of 6 Capacitors which includes the 4 Axial capacitors and zip ties to tie them down to the PCB.  All capacitors are 105c in this kit.  All radial capacitors in this kit are Top quality Nichicon low ESR / high hour rated capacitors.   I have never seen another vendor kit with all 105c axial capacitor included but this kit does because we had them built special for us to put in the kit.  All of our Cap Kits / Get Well Kits include a sticker so you can place it on the PCB to help you keep track of the work you did and when it was done.  6 Capacitors included in kit with great instructions.  We stock most other components that may be needed to repair these power supplies including the PCB header connector.  If you need a new PCB header connector they are on our site and any of the three we stock will work perfectly and they are exact original headers (MR1003, MR1002 and MR1010) and we stock the wire harness connector.

Additional information

Weight .250 lbs
Dimensions 6 × 4 × 1.5 in

13 reviews for Midway A082-90400 Power Supply 105C Cap Kit

  1. [email protected] (verified owner)

    Got my old power supply working again.

  2. The Lost Invaders

    Great product, just one thing, that 2 originals blue capacitors are bigger than the capacitors in the kit, so you need to attach them differently, and zip ties included are too big, you must drill holes (or buy smaller ones), except that, everything is alright. Thanks form France, you are the best!

    • security0001

      Thank you very much for your support, and just a reminder that Note 4 on the instructions say you don’t need the zip ties because the newer caps are smaller and don’t require them but it explains how to drill holes if you choose to use the zip ties.

  3. Greg2608 (verified owner)

    Used this along with the Mega rebuild kit to get old power supply up and running. Easy to follow directions included.
    Thanks for the help.

  4. Ken Moritz (verified owner)

    Looking forward to rebuilding the power supply for my Midway SI deluxe. So happy to have found your website to help me through this project.
    You guys make this fun.
    Thanks -Ken

  5. Steveslotty (verified owner)

    This power supply capacitor kit is very handy.
    I was going crazy trying to find the correct caps.
    I was even contemplating drilling my PCB to use radial capacitors. Would be better if the caps were Panasonic or Nichicon, but Shiangchen caps are alright (brand caps in kit).
    I haven’t had an issue with them yet. I’ve used them before.
    I’d for sure buy this kit again.
    I have a project Dog Patch that needs its power supply rebuilt.
    But I have to find the parts I need for Dog Patch, before I even think about its power supply.
    I used this on a original Space Invaders.
    Makes life much simpler when dealing with a pcb that has axial capacitors.

    • security0001

      Nichicon and Panasonic no longer make electrolytic axial capacitors and you can’t find a better rated axial than ours since we have them made special for us and are a fraction of the price of any other axials that don’t last like our capacitors. Customers and myself both have run these caps hard for many many years without issue or complaint!!

  6. [email protected] (verified owner)

    High quality caps. Super fast shipment. Great to have this ready to install

  7. Matt Majewski

    Great kit, very clear instructions, and the illustration included wth the kit is spot on.

  8. Ben Bassinger (verified owner)

    Worked great and the easy to follow instructions and information make this a no brainer to rebuild these boards!! Make sure to pick up the full power supply kit for a perfect match. All voltages spot on after rebuild!

  9. Jerry (verified owner)

    Good quality parts and fast shipping.

  10. Jared Bresee (verified owner)

    I had no problem with this capacitor kit! I didn’t need to drill anything all the leads reached long enough. I didn’t even use the zip ties because these capacitors aren’t as big as the old ones therefore not as heavy. Back up, because I’m gonna use a switching power supply but I didn’t want a bunch of old leaky capacitors. Now my board looks clean and is ready in case I do need to use it

  11. Daniel (verified owner)

    Great kit has everything you need and my

  12. cklinejr (verified owner)

    Great cap kit!

  13. [email protected] (verified owner)

    The original caps in my Sea Wolf were pretty much working fine but when running the test rom, it would occasionally report a ram error, but only at startup. I speculated that the reset circuit on the power supply was letting the cpu boot too early, before the ram was in a reliable state. After the cap kit, I haven’t seen that happen anymore.

Add a review

Your email address will not be published. Required fields are marked *