Midway 90400 Power Supply Mega Deluxe Rebuild Kit

(8 customer reviews)

$16.82

Bally Midway A082-90400 & 80-904B Mega Deluxe Linear Power Supply Rebuild Kit is a completely inclusive kit with all common failure components and all parts in this kit are rated the same or much higher then the original they are replacing.  NO CAPACITORS INCLUDED IN THIS KIT BUT WE DO HAVE THE CAP KITS SEPARATE AND ALSO A COMBINED REBUILD AND CAP KIT ON OUR SITE.  SEE FULL DESCRIPTION FOR ALL PARTS INCLUDED IN THIS KIT.

44 in stock (can be backordered)

Description

Bally Midway A082-90400 & 80-904B Mega Deluxe Linear Power Supply Rebuild Kit is a completely inclusive kit with all common failure components and all parts in this kit are rated the same or much higher then the original they are replacing.  NO CAPACITORS INCLUDED IN THIS KIT BUT WE DO HAVE THE CAP KITS SEPARATE AND ALSO A COMBINED REBUILD AND CAP KIT ON OUR SITE.  This kit includes the following:

  1. Three new Trimmer Pots.
  2. Four new transistors/voltage regulators.
  3. New 1.5A, 1A and 6A Diodes 12 new diodes total.
  4. Silicon Mica TO-220 (2 piece).
  5. Silicon Mica TO-3 (1 pieces).
  6. 1 package thermal heat sink compound.
  7. one new tantalum capacitor.
  8. one new zener diode
  9. one new resistor.

Bally Midway A082-90400 / 80904B arcade Power Supply Kit.  This power supply is found in Space Invaders, Sea Wolf and any other game that use this model of linear power supply.  Included in this kit are great instructions.  All of our Rebuild Kits / Get Well Kits include a sticker so you can place it on the PCB to help you keep track of the work you did and when it was done.  This “Mega Deluxe Rebuild Kit” has all the above listed parts included in kit with great instructions and we include a map custom made with photoshop that we created to aide in your installation.  If you need a new PCB header connector they are on our site and any of the three we stock will work perfectly and they are exact original headers (MR1003, MR1002 and MR1010) and we stock the wire harness connector.

Additional information

Weight .3125 lbs
Dimensions 6 × 4 × 1 in

8 reviews for Midway 90400 Power Supply Mega Deluxe Rebuild Kit

  1. [email protected] (verified owner)

    Got my old power supply working again.

  2. The lost Invaders

    Perfect kit, parts are great, and everything fit perfectly. Thanks from France.

  3. Greg2608 (verified owner)

    Great kit had all the parts needed and a great guide sheet to make sure of proper installation. Would recommend.

  4. John Izzo (verified owner)

    Great Parts, Great guide.

  5. Ken Moritz (verified owner)

    Looking forward to rebuilding the power supply for my Midway SI deluxe. So happy to have found your website to help me through this project.
    You guys make this fun.
    Thanks -Ken

  6. Matt Majewski (verified owner)

    Grest kit, clear instructions, and the included illustration was spot on.

  7. Ben Bassinger (verified owner)

    Worked great and the easy to follow instructions and information make this a no brainer to rebuild these boards!!

  8. Jared Bresee (verified owner)

    This kit is totally needed especially if you’re going to use the old power supply. SI is an extremely early arcade game so I don’t really trust a lot of the components, especially when it comes to the power board. Sure you don’t have to replace everything, but, since you’re at it you might as well. Don’t skimp get this kit even if you’re not going to use the power board it’s nice to have everything rebuilt and ready to go. And while you’re at it don’t forget about the capacitor kit for this bored, it’s probably even more important

Add a review

Your email address will not be published. Required fields are marked *