Atari Audio Regulator II Rebuild & 105c Cap Kit which is used to rebuild the following arcade PCB’s A035435-02, A035435-03, A035435-04, A035435-05, A035435-06 (AR2-02, AR2-03, AR2-04, AR2-05 & AR2-06). AR2 kit with 105c axial capacitors. “Mega Deluxe Cap Kits” Our kits have some of the BEST quality, low ESR, and longest life capacitors included. This kit has Axial Capacitors for C1, C4, C9, C10, C12, C13, C18, C19, C22, C23, C24, C31 includes new transistors for Q2, Q3, Q8, Q9 new resistors for R5, R29, R30, New diodes for CR1, CR4, CR5, CR6, CR7, CR8 and new mica insulators for Q2, Q3, Q8, Q9 and non conductive thermal compound paste all included in this kit. We have also increased the original Wattage of the resistors on R29 and R30 to 1/2 Watt. All of our arcade Rebuild Kits / Get Well Kits include a sticker so you can place it on the PCB to help you keep track of the work you did and when it was done. This ARII kit has all the above listed parts included in this kit with great instructions. ORDERING NOTES: CR5 thru CR8 diodes on some early AR2 PCBs used a GER4002 or other comparable 1amp diode which Atari later upgraded with a 3amp 1N5400 series diode. It’s very rare to find the AR2 PCBs prepped for the 1amp diodes. The lead diameter on the 1amp diodes were much smaller so the 3amp 1N5400 series diodes in this kit won’t fit the PCB holes of the 1amp diodes and DON’T enlarge the PCB holes because that can destroy the PCB. When ordering add a NOTE to your order and let us know if you need the 1amp diodes and we will include upgraded 1.5amp diodes that will fit the PCB holes on the AR2.
Craig Baker (verified owner) –
Great kit, well put together using name brand quality parts. Got my regulator board back running in no time.
Bryan McIntire (verified owner) –
After chasing down a no audio issue on my Centipede, this was the last ditch effort as I didn’t have -5v coming off my ARII. Rebuild kit later, super stable voltages and sound is back. Great kit and mega fast shipping.
Briankirby (verified owner) –
This kit made my ar2 pcb for my tempest run a lot cooler. It is reasonably priced, easy to do and was a relaxing evening, no stress install. My ar2 pcb looks like new, and runs great. I can have peace of mind my voltages aren’t going to fail and take out my game pcb. Before this kit, my ar2 pcb was working but the caps had cracks and were out of spec. My ar2 was running hot.
ERIK J TERMAAT (verified owner) –
Great kit, simple directions, made my job nice and easy getting my AR 2 up and running.