We have discounted this kit from 54.72 to 43.67 because it doesn’t include the two 390uf caps in the kit because we are out of stock of that value and no one has them so when Nichicon sends us more we will put them back in the kit and adjust the price.
Wells Gardner D9200 / D9204 / D9205 27″ & 33″ Series arcade Monitor Cap Kit 105C 100% Nichicon Capacitors. This kit is for the D9204 27″ monitor and the D9205 33″ monitor (27D9204, 33D9205, WGM2792 and WGM3392 which can have P857 and 025A1569-001E on the PCB but make sure to check your specific model with the NOTE below as both models can have this on the PCB. 74 Capacitors included in the kit and with great instructions. “Mega Deluxe Cap Kits” This kit has some of the BEST quality, low ESR, and longest life capacitors included because after replacing 74 capacitors on this chassis you will be glad you will never have to do that again and you will thank us for putting together such a top quality kit, so spend alittle extra now and you will never recap this chassis again. All of our Cap Kits / Get Well Kits include a sticker so you can place it on the monitor to help you keep track of the work you did and when it was done. IF YOU NEED A KIT FOR THE D9202 CHASSIS WE ALSO HAVE THAT KIT ON OUR SITE SO DON’T USE THIS KIT FOR THE D9202. NOTE: The Two Filter caps for this chassis are both 470uf 250v (must use our 22mm diameter ones) and are not included in the kit but can be purchased separately on our site. NOTE: This kit is for a chassis with C825 390uf and C826 390uf. If you have 220uf cap at C825 and 100uf at C826 then you need our other D9200 / D9202 Kit.
gregolso (verified owner) –
Worked great, good documentation. Took forever though as 74 caps! Lol
This kit saved my WG arcade monitor. I really wanted to keep the authentic CRT appearance and performance and I’m up and running again.
Marc Crouse (verified owner) –
Great instructions and packed as expected.
As always, fast shipping!
Dan S. (verified owner) –
Good kit but missing cap C121, cap is a 10uf 50v. Was not on the paperwork that comes with the kit and there was not an additional cap in the kit for that position
the D9200 / D9202 kit is the one with the C121 cap so you ordered the wrong kit for you chassis.