Hantarex MTC-900/E (DE-1) Series arcade Monitor Cap Kit 105C 100% Nichicon capacitors. The MTC-900E chassis we make two different kits for since there are so many variations of deflection, interface, power, neck and east west PCB’s so if you have any questions on which kit fits your chassis please email us before buying so you get the correct kit. The main differences are in the deflection and interface PCB on this chassis and this kit is for the DE-1 deflection pcb with an interface pcb with no specific markings on it and usually has a Neck PCB with NE-01 markings and also you will use this kit with DE-04 and DE-06 deflection PCB and IE-04 interface PCB and also with DE-06 deflection PCB and IE-06 interface PCB, we have also found the DE-2 deflection PCB with the IE-02 interface PCB should use this kit. If you have a DE-3 deflection pcb with a PE-07 / PE-02 interface pcb then use our other kit listed on our site for the DE-3. “Mega Deluxe Cap Kits” Our kits have some of the BEST quality, low ESR, and longest life capacitors included. All of our Cap Kits / Get Well Kits include a sticker so you can place it on the monitor to help you keep track of the work you did and when it was done. 33 capacitors included in kit along with great instructions. NOTE: C11 which is 330uF 250V snap capacitor (10mm lead spacing) can be purchased separately and is the only capacitor not included in the kit, but you can search our site by value and find it if needed, but if you have a separate power PCB mounted on the side frame of the chassis then C11 is an Axial Capacitor (330uf 250v) and we also stock the axial version on our site.