Williams D8784 Mega Deluxe Power Supply Rebuild Kit is a completely inclusive kit with components and all connectors/headers and almost every part is rated much higher then the original its replacing. NO CAPACITORS INCLUDED IN THIS KIT BUT THEY CAN BE PURCHASED IN THE D-8784 CAP KIT FROM THE LINK BELOW. This kit includes the following:
- Molex PCB header pins for 4J1, 4J2, 4J3, 4J4/4P4 (2 pieces 24 pin breakaway headers)
- Molex .156 connector housings for wire harness that connect to 4J1, 4J2, 4J3, 4J4/4P4 (4 pieces)
- Molex Polarizing keys (4 pieces)
- Molex Trifurcon crimp pins (50 pieces 18-20 gauge)
- Diodes for D1, D2, D3 (3 pieces)
- All new slow blow fuses for F1, F2, F3, F4, F5 (5 pieces)
- New IC1 and IC2 Voltage Regulator Chips DIP-14 (2 pieces)
- IC DIP-14 dual wipe sockets (2 pieces)
- 35A 1000V BR1 (correct one with wire leads)
- 8A 1000V BR2
- 2A 1000V BR3
- Both NEW heat sink transistors 2N3055 and upgraded 2N6059
- Silicon Mica TO-3 (2 pieces)
- 1 package thermal heat sink compound
Williams D-8784 5773-09679-00 Arcade Linear Power supplies used on games such as Joust, Robotron 2084, later model Stargate, Sinistar, Bubbles, Moon Patrol, and Blaster or any other game with this power supply. All of our Rebuild Kits / Get Well Kits include a sticker so you can place it on the PCB to help you keep track of the work you did and when it was done. This “Mega Deluxe Rebuild Kit” has all the above listed parts included in kit with great instructions and we include a map custom made with photoshop that we created to aide in your installation and instructions on how to add a pot to make the +5vdc adjustable and we have the pots sold separately Click Here. If you are rebuilding this power supply we recommend you buy the D8784 Cap kit which includes every electrolytic capacitor even the large 18000uf axial one so click here to be directed to it. NOTE: we have a video on how to modify the pot and install it so please add a note or email us and we will send you a link. we will be embedding it on our site here in the future. NOTE: We recommend buying a MP1018 Heatsink from our site for the BR1 bridge rectifier which will greatly improve the reliability and life of this power supply.
Cysnake (verified owner) –
Best rebuild kit out there! My power supply is rock solid now!
Michael Behr (verified owner) –
This is a high quality kit. This is my go to place for parts!
Sasha (verified owner) –
This kit is exceptionally well put together along with this companies many kits. Quality products, organized products, and exceptional customer service.
This rebuild kit was fix my power supply perfectly.
cjoli (verified owner) –
Excellent kit, have bought 2 of these so far to rebuild bad Williams power supplies.
Daniel McMurtrey (verified owner) –
Lots of parts way more then you can see in the pictures. My power supply should last for another 29 years.
sean dotson (verified owner) –
Very well put together kit… everything needed to solidify your williams power supply 🙂
CharlieG (verified owner) –
Worked great to help bring my Robotron power supply back from the dead.
rogerxy (verified owner) –
Really great put together kit with high quality components to bring back my Moon Patrol PSU to life!
Oldworldman (verified owner) –
Worked out great to bullet proof my Robotron! All the parts were spot on and better than factory! A++++