Description
10 Amp 1000 V Square Bridge Rectifier with wire leads and case size of .750 x .750 x .275. Used on many power supplies including the nintendo power supplies and this is a higher rated replacement for the original 8A bridge rectifier in the nintendo power supplies. This is also an upgraded and higher rated replacement for the DB100 on the 19V2000, G05-801, G05-802 and G05-805 arcade monitor chassis. This is higher rated and can replace any of the following NTE5312, NTE5313, NTE5314, NTE5315, NTE5316, NTE5317, VJ248M, VJ448M, VJ648M, VJ848M, VJ1048M, 28-46-02, 38A5576-000 and 28-000046-02. NOTE: This Bridge Rectifier may have a slightly larger case size than some of the replacements listed so make sure it will physically fit your application.
robotworkshop (verified owner) –
I had to repair a couple G05 monitors and it it nice to be able to get some of the other common parts needed from a single source. This will make a good replacement.
Chardo (verified owner) –
Helped me fix a dartboard power supply! Work like a charm.
Jared Bresee (verified owner) –
I got a couple of these. They seem to be coming for Williams pinball but I also got it to work on a Kenwood radio. Don’t forget some of your other electronics use a lot of the same components as your arcade stuff do. Plus Peter always stocks the highest quality product so you know you’re getting the real deal. Again if you’re thinking about getting one I say get three or four of these cuz they are used in a lot of different machines.
Jared Bresee (verified owner) –
Back again ordered two more right away. These were perfect. Like I said not only are they good for arcade stuff but they’re also good for other applications as well. Always good to have a couple of these handy. And you know you’re getting high quality no Chinese garbage here, only the best!
daniel64485 (verified owner) –
I always replace these when rebuilding 19v2000 chassis. Fit perfectly. Great quality.
daniel64485 (verified owner) –
I use this every time when I recap Atari deflection boards!!
Jots (verified owner) –
Awesome delivery time! And this Bridge Rectifier is a perfect fit for my project. Thanks Arcade Part and Repairs. Will be a long life customer. Thanks !!!
rick (verified owner) –
on your website, tell people the 10 amp 1kv bridge intended for bally and stern 40 year old pinball machines are a little bigger and thicker, but electrically equivalent to a VJ248. i was expecting this. would likely fit, but drill new holes for the leads. options are replace all 3 bridges, or do what ive done in the past: put a washer and heat sink compound on the bridges you dont replace so the board mounts even.
i will be buying pinball and video game parts from you in the future. you have a well stocked selection. i did component level repair of pinballs and video games for 20 years including during the glory days, 1979 to 1999. now im retired.
Mark (verified owner) –
Great quality bridge rectifier. A perfect fit upgrade replacement for the Arachnid 6300 series dart board power supply. Arcade parts and repair is my go to source when doing board work. Very fast shipping too.