Bally AS-2518-22 Solenoid Driver PCB 105C Cap Kit

(10 customer reviews)

$25.23

Bally Solenoid Driver / Voltage Regulator AS-2518-22 PCB 105C Cap Kit.  This Bally cap kit works on Pinball games that use the AS-2518-22 or AS-2518-16 or AS-2518-147 pcb.  NOTE: This kit works for all PCB’s listed but the location numbers on the AS-2518-147 PCB may vary from the instructions.  Other ID numbers on the PCB are A3 and P-2948-297.  This “Mega Deluxe Cap Kit” has a total of 3 Capacitors.

67 in stock (can be backordered)

Description

Bally Solenoid Driver / Voltage Regulator Board AS-2518-22 PCB 105C Cap Kit.  This Bally cap kit works on Pinball games that use the AS-2518-22 or AS-2518-16 or AS-2518-147 and most Stern SDU-100 version of pcb.  This kit will also work for the 6803 Pinball Power Module A080-91785-C000, A080-91785-D000, A084-91785-D000 and M051-00C53-D001.  NOTE: This kit works for all PCB’s listed but the location numbers on the AS-2518-147, SDU-100, A080-91785-D000 and A080-91785-C000 PCB may vary from the instructions included with our kit.  Other ID numbers on the PCB are A3 and P-2948-297.  This “Mega Deluxe Cap Kit” has a total of 3 Capacitors which are one Axial leaded 160uF400 (which replaces the 160uf 350v capacitor), one upgraded 12,000uf35V with eyelet leads (which replaces the 11000uf 20v or 11700uf 30v capacitors), and one 2.2uf50v Axial leaded capacitors.  All capacitors are 105c in this kit.  All of our Cap Kits / Get Well Kits include a sticker so you can place it on the PCB to help you keep track of the work you did and when it was done.  3 Capacitors included in kit with great instructions.  Our kits have some of the BEST quality, low ESR, and longest life capacitors in them.  Most of the common problems are fixed by replacing the old electrolytic capacitors on this PCB.  There are no other vendors that offer this kit with all 105C capacitors with EXACT matching Axial and EYELET leaded Capacitors as the original capacitors and these capacitors are EXCLUSIVELY manufactured for Arcade Parts and Repair. 

Additional information

Weight .21875 lbs
Dimensions 6 × 4 × 1.25 in

10 reviews for Bally AS-2518-22 Solenoid Driver PCB 105C Cap Kit

  1. Robert Cecil (verified owner)

    I’ve ordered 4 of these now and will order one for every early Bally or Stern pin that passes through my gameroom. Great kit.

  2. Heath Ashley (verified owner)

    I use these at least 2x a week, and they are priced the best! Convenience and quality-

  3. David Dronet (verified owner)

    These kits are convenient and contain quality components. It’s much easier and cheaper for me to order these over purchasing from my local electronics shop. Very satisfied!

  4. Chadq Tower (verified owner)

    Kit arrived quickly, looks just like it should, order with confidence.

  5. Kjell Ulfves (verified owner)

    Very satisfied with my purchase. Easy to order, quality components, fast shipping!

  6. Jon (verified owner)

    The high voltage supply on my AS-2518-22 had a full on melt down and the 5V regulator was struggling under load after a decade of storage. This kit, along with replacing all transistors and diodes that had burnt up in the high voltage regulator circuit, brought my Future Spa back to life. Thank you so much!

  7. Deep 6 Arcade (verified owner)

    Convenience is why you buy this. When you don’t want to remember or measure your current caps, then source them from Mouser or some other place. This kit is where it’s at. Everything you need in one box.

  8. Paul Vogel (verified owner)

    Just what the Dr. Ordered, quick fix for my solenoid driver board.

  9. Jay Fleming (verified owner)

    I buy all my cap kits from Arcade Parts and Repair, every Pinball I shop gets the caps replaced, most are 40+ years old. Just cant beat the kits. Good product.

  10. Scott (verified owner)

    First class cap kit – Top notch. Highly recommended!!

Add a review

Your email address will not be published. Required fields are marked *