Bally Solenoid Driver / Voltage Regulator AS-2518-22 PCB 105C Cap Kit. This Bally cap kit works on Pinball games that use the AS-2518-22 or AS-2518-16 or AS-2518-147 and most Stern SDU-100 version of pcb. This kit will also work for the 6803 Pinball Power Module A080-91785-D000. NOTE: This kit works for all PCB’s listed but the location numbers on the AS-2518-147 and SDU-100, A080-91785-D000 PCB may vary from the instructions included with our kit. Other ID numbers on the PCB are A3 and P-2948-297. This “Mega Deluxe Cap Kit” has a total of 3 Capacitors which are one Axial leaded 160uF400, one 11,000uf35V with eyelet leads, and one 2.2uf50v Axial leaded capacitors. All capacitors are 105c in this kit. All of our Cap Kits / Get Well Kits include a sticker so you can place it on the PCB to help you keep track of the work you did and when it was done. 3 Capacitors included in kit with great instructions. Our kits have some of the BEST quality, low ESR, and longest life capacitors in them. Most of the common problems are fixed by replacing the old electrolytic capacitors on this PCB. There are no other vendors that offer this kit with all 105C capacitors with EXACT matching Axial and EYELET leaded Capacitors as the original capacitors and these capacitors are EXCLUSIVELY manufactured for Arcade Parts and Repair.